Wednesday, October 31, 2007
RotateME v2.0
rotateMe v2.0 on N95 with auto rotation function like an iphone.
Available (unsigned) end november.
A new version will be also available for n73, N80 and E65:
- New User Interface
- Rotate the screen by launching the app (like an E60)
Monday, September 24, 2007
How do I unlock them?
If your phone is older BB5, then Dejan Kaljevic, a renowned GSM expert, has released software solution. His solution works for the following phones:
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia E60 RAP3G v2.20E PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA
I have one of those phones. How do I unlock it?
You need
Phone (SIM card removed!)
CA43 or DKU5 cable (Original Nokia with 13 pins)
Software (http://users.net.yu/~dejan/download/bb5.zip)
Instructions
Connect cable to computer and phone
Set proper COM cable (must be, between 1 and 9)
Download unlocker, run `install.bat`
Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg with a text editor set proper COM port (1-9)
Run c:/bb5 unlocker/BB5logunlocker.exe
Turn phone on. While it is turning on, click READ PHONE. You should see "DONE"
Click MAKE LOG, a log will be created. This log is used to generate the codes. Wait until you see "DONE".
Log file is in folder LOGS. Start BB5_calc.exe to make the PSW file.
Press button SP UNLOCK and unlock your phone.
It didn't work!
Solution courtesy to_deal_with on gsmhosting.com
- Phone off,
- Connect the cable to phone anc pc (dku5, jaf, serial)
- Open the program
- Power on the phone
- When you see Nokia on the screen, immediately press on Read phone!
Afterwards use BB5 Calc and then SP Unlock
This method has always been a success.
If I power on the phone first and let it start up completely, by inserting the cable phone says enhancement not supported and making log fails.
In this case, reconnect the cable and Press Write backup.
If writing backup succeeded, Just follow the method I wrote above. Tested on many N70.
In Dejan's words:
Be sure that my BB5 logger is installed properly with apropriate FBUS interface (DKU-5) or old clasic FBUS cable connected to standard COM port.
Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button. If everything is ok, some data will be readed and displayed, otherwise check your connection, phone, cables, etc.
If logger shows message "SP Data IS corrupted" than you have phone that somebody played with it and destroyed field 308,1. So, you have to fix that field by sending that phone to official NOKIA repair centre!!!
If everything is OK you can press "Make Log" button. LOGER will create backup of field 308,1 and try to make LOG file. In that process, sometimes field 308,1 can be corrupted which can be checked by clicking again on "Read Phone" button.
NOW, if logger shows message "SP Data IS corrupted" than you just have to click several times "WR Backup" and "Read Phone" to check that is your phone is OK.
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia E60 RAP3G v2.20E PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA
I have one of those phones. How do I unlock it?
You need
Phone (SIM card removed!)
CA43 or DKU5 cable (Original Nokia with 13 pins)
Software (http://users.net.yu/~dejan/download/bb5.zip)
Instructions
Connect cable to computer and phone
Set proper COM cable (must be, between 1 and 9)
Download unlocker, run `install.bat`
Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg with a text editor set proper COM port (1-9)
Run c:/bb5 unlocker/BB5logunlocker.exe
Turn phone on. While it is turning on, click READ PHONE. You should see "DONE"
Click MAKE LOG, a log will be created. This log is used to generate the codes. Wait until you see "DONE".
Log file is in folder LOGS. Start BB5_calc.exe to make the PSW file.
Press button SP UNLOCK and unlock your phone.
It didn't work!
Solution courtesy to_deal_with on gsmhosting.com
- Phone off,
- Connect the cable to phone anc pc (dku5, jaf, serial)
- Open the program
- Power on the phone
- When you see Nokia on the screen, immediately press on Read phone!
Afterwards use BB5 Calc and then SP Unlock
This method has always been a success.
If I power on the phone first and let it start up completely, by inserting the cable phone says enhancement not supported and making log fails.
In this case, reconnect the cable and Press Write backup.
If writing backup succeeded, Just follow the method I wrote above. Tested on many N70.
In Dejan's words:
Be sure that my BB5 logger is installed properly with apropriate FBUS interface (DKU-5) or old clasic FBUS cable connected to standard COM port.
Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button. If everything is ok, some data will be readed and displayed, otherwise check your connection, phone, cables, etc.
If logger shows message "SP Data IS corrupted" than you have phone that somebody played with it and destroyed field 308,1. So, you have to fix that field by sending that phone to official NOKIA repair centre!!!
If everything is OK you can press "Make Log" button. LOGER will create backup of field 308,1 and try to make LOG file. In that process, sometimes field 308,1 can be corrupted which can be checked by clicking again on "Read Phone" button.
NOW, if logger shows message "SP Data IS corrupted" than you just have to click several times "WR Backup" and "Read Phone" to check that is your phone is OK.
I have one of those phones. How do I unlock it?
You need
Phone (SIM card removed!)
CA43 or DKU5 cable (Original Nokia with 13 pins)
Software (http://users.net.yu/~dejan/download/bb5.zip)
Instructions
Connect cable to computer and phone
Set proper COM cable (must be, between 1 and 9)
Download unlocker, run `install.bat`
Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg with a text editor set proper COM port (1-9)
Run c:/bb5 unlocker/BB5logunlocker.exe
Turn phone on. While it is turning on, click READ PHONE. You should see "DONE"
Click MAKE LOG, a log will be created. This log is used to generate the codes. Wait until you see "DONE".
Log file is in folder LOGS. Start BB5_calc.exe to make the PSW file.
Press button SP UNLOCK and unlock your phone.
Phone (SIM card removed!)
CA43 or DKU5 cable (Original Nokia with 13 pins)
Software (http://users.net.yu/~dejan/download/bb5.zip)
Instructions
Connect cable to computer and phone
Set proper COM cable (must be, between 1 and 9)
Download unlocker, run `install.bat`
Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg with a text editor set proper COM port (1-9)
Run c:/bb5 unlocker/BB5logunlocker.exe
Turn phone on. While it is turning on, click READ PHONE. You should see "DONE"
Click MAKE LOG, a log will be created. This log is used to generate the codes. Wait until you see "DONE".
Log file is in folder LOGS. Start BB5_calc.exe to make the PSW file.
Press button SP UNLOCK and unlock your phone.
It didn't work!
Solution courtesy to_deal_with on gsmhosting.com
- Phone off,
- Connect the cable to phone anc pc (dku5, jaf, serial)
- Open the program
- Power on the phone
- When you see Nokia on the screen, immediately press on Read phone!
Afterwards use BB5 Calc and then SP Unlock
This method has always been a success.
If I power on the phone first and let it start up completely, by inserting the cable phone says enhancement not supported and making log fails.
In this case, reconnect the cable and Press Write backup.
If writing backup succeeded, Just follow the method I wrote above. Tested on many N70.
- Phone off,
- Connect the cable to phone anc pc (dku5, jaf, serial)
- Open the program
- Power on the phone
- When you see Nokia on the screen, immediately press on Read phone!
Afterwards use BB5 Calc and then SP Unlock
This method has always been a success.
If I power on the phone first and let it start up completely, by inserting the cable phone says enhancement not supported and making log fails.
In this case, reconnect the cable and Press Write backup.
If writing backup succeeded, Just follow the method I wrote above. Tested on many N70.
In Dejan's words:
Be sure that my BB5 logger is installed properly with apropriate FBUS interface (DKU-5) or old clasic FBUS cable connected to standard COM port.
Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button. If everything is ok, some data will be readed and displayed, otherwise check your connection, phone, cables, etc.
If logger shows message "SP Data IS corrupted" than you have phone that somebody played with it and destroyed field 308,1. So, you have to fix that field by sending that phone to official NOKIA repair centre!!!
If everything is OK you can press "Make Log" button. LOGER will create backup of field 308,1 and try to make LOG file. In that process, sometimes field 308,1 can be corrupted which can be checked by clicking again on "Read Phone" button.
NOW, if logger shows message "SP Data IS corrupted" than you just have to click several times "WR Backup" and "Read Phone" to check that is your phone is OK.
Start loger.
Once connected phone by FBUS interface to PC, press "Read Phone" button. If everything is ok, some data will be readed and displayed, otherwise check your connection, phone, cables, etc.
If logger shows message "SP Data IS corrupted" than you have phone that somebody played with it and destroyed field 308,1. So, you have to fix that field by sending that phone to official NOKIA repair centre!!!
If everything is OK you can press "Make Log" button. LOGER will create backup of field 308,1 and try to make LOG file. In that process, sometimes field 308,1 can be corrupted which can be checked by clicking again on "Read Phone" button.
NOW, if logger shows message "SP Data IS corrupted" than you just have to click several times "WR Backup" and "Read Phone" to check that is your phone is OK.
My phone is hardlocked. What can I do?
If you have already used all 3 attempts to unlock via keypad, but you have unlock codes from your carrier, you can use the program to input the codes.
In "c:\bb5_unlocker\psw" create a text file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones IMEI
Then in that created file enter in "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb" is the unlock codes and where is "c" enter your logs level number (1-7).
Save the file
Use "SP UNLOCK" function
In "c:\bb5_unlocker\psw" create a text file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones IMEI
Then in that created file enter in "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb" is the unlock codes and where is "c" enter your logs level number (1-7).
Save the file
Use "SP UNLOCK" function
My phone is a BB5 phone, but...
My phone is a BB5 phone, but not on the list of phones that can be unlocked with Dejan's software. What can I do?
If your phone is locked to Vodafone UK you can try this:
http://www.fonefunshop.co.uk/Unlocking/nokiabb5.htm
Or you will have to wait until the solution is released for free.
If your phone is locked to Vodafone UK you can try this:
http://www.fonefunshop.co.uk/Unlocking/nokiabb5.htm
Or you will have to wait until the solution is released for free.
Subscribe to:
Posts (Atom)